Updated: 8:22 a.m. June 29

First discovered: More than a month ago, 10:50 a.m. May 18

Initial location: Off Sandy Ave, Simi Valley, Ventura County, Calif.

Fire unit: Ventura County Fire Department

Fire type: Wildfire

Fire name: Sandy Fire

Sandy Fire initially started 10:50 a.m. May 18 on Off Sandy Ave, Simi Valley in Ventura County, California.

Since its discovery more than a month ago, it has burned 2,183 acres. As of Monday morning, the fire crew has achieved full containment of the blaze. However, the cause is still under investigation.

Fire containment

What does 100% containment mean?

Note that full containment doesn’t mean the fire is completely out. In this case, it means that the wildfire has been fully enclosed by a control line and it is now stopped from spreading. A fully contained wildfire may continue to burn within the containment perimeter but is not likely to spread.

However, there’s a significant difference between containing and controlling a wildfire. After the fire is fully contained, the next step is to control it. Controlling a fire means ensuring that the fire can’t spread or cross the containment line.

Containment is part of a larger plan for managing a wildfire. It is normally expressed as a percentage and it refers to how much of the fire perimeter has been surrounded/enclosed by a control line that firefighters create. The containment percentage indicates a certain level of control, but it doesn’t always correlate to safety level. Also, it’s important to note that containment doesn’t mean a fire is out.

How is containment measured?

The incident’s central command constantly receives progress reports from firefighters on the ground. As the fireline is constructed, inspected or reinforced, mappers record those details to adjust the containment percentage. The percentage tells the public how much of the fire perimeter is believed to not go beyond the control lines.

Source: Cal Fire