Updated: 9:42 p.m. July 11

First discovered: 33 hours ago, 12:39 p.m. July 10

Initial location: Moore Road and Nelson Lane, Lincoln, Placer County, Calif.

Fire unit: Lincoln Fire Department

Fire type: Wildfire

Fire name: Moore Fire

Moore Fire initially started 12:39 p.m. July 10 in Placer County, California.

After being active for 33 hours, it has burned 20 acres. By Friday evening, the fire crew has achieved full containment of the blaze. However, investigations into the cause are ongoing.

Fire containment

What does 100% containment mean?

Note that full containment doesn’t mean the fire is completely out. In this case, it means that the whole perimeter of the wildfire has been surrounded by a control line and it is now stopped from spreading. A fully contained wildfire may continue to burn within the containment perimeter but is not likely to spread.

However, there’s a significant difference between containing and controlling a wildfire. After the fire is fully contained, the next step is to control it. Controlling a fire means ensuring that the fire can’t spread or cross the containment line.

Containment is part of a larger plan for managing a wildfire. It is normally expressed as a percentage and it refers to how much of the fire perimeter has been surrounded/enclosed by a control line that firefighters create. The containment percentage indicates a certain level of control, but it doesn’t always correlate to safety level. Also, it’s important to note that containment doesn’t mean a fire is out.

How is containment measured?

The incident’s central command constantly receives progress reports from firefighters on the ground. As the fireline is constructed, inspected or reinforced, mappers record those details to adjust the containment percentage. The percentage tells the public how much of the fire perimeter is believed to not go beyond the control lines.

Source: Cal Fire