Updated: 2:04 p.m. Nov. 13

First discovered: 11 days ago, 7:54 a.m. Nov. 2

Initial location: Tuolumne County, Calif.

Fire type: Wildfire, Type 4

Fire name: Gianelli

Gianelli Fire initially started 7:54 a.m. Nov. 2 in Tuolumne County, 6 Miles E From Pinecrest.

After being active for 11 days, it has burned 372 acres of federal land managed by the United States Forest Service. The fire crew managed to contain the fire entirely by Thursday afternoon. It is believed that the fire was naturally caused. So far, the cost for managing the fire stands at $50,000.

The wildfire’s primary fuel source includes timber, litter and understory vegetation.

NIFC Fire Complexity Analysis

This wildfire is considered to be a Type 4 incident. What it means:

• Command staff and general staff functions are not activated.

• Resources are local and vary from a single module to several resources.

• The incident is usually limited to one operational period in the control phase.

• No written incident action plan (IAP) is required. However, a documented operational briefing will be completed for all incoming resources.

Fire containment

What does 100% containment mean?

Note that full containment doesn’t mean the fire is completely out. In this case, it means that firefighters have managed to get a line completely around the wildfire’s perimeter and it is now stopped from spreading. A fully contained wildfire may continue to burn within the containment perimeter but is not likely to spread.

However, there’s a significant difference between containing and controlling a wildfire. After the fire is fully contained, the next step is to control it. Controlling a fire means ensuring that the fire can’t spread or cross the containment line.

Containment is part of a larger plan for managing a wildfire. It is normally expressed as a percentage and it refers to how much of the fire perimeter has been surrounded/enclosed by a control line that firefighters create. The containment percentage indicates a certain level of control, but it doesn’t always correlate to safety level. Also, it’s important to note that containment doesn’t mean a fire is out.

How is containment measured?

The incident’s central command constantly receives progress reports from firefighters on the ground. As the fireline is constructed, inspected or reinforced, mappers record those details to adjust the containment percentage. The percentage tells the public how much of the fire perimeter is believed to not go beyond the control lines.

Source: National Interagency Fire Center