Updated: 5:46 p.m. July 24

First discovered: 50 hours ago, 2:49 p.m. July 22

Initial location: San Diego County, Calif.

Fire type: Wildfire, Type 3

Fire name: Creelman

Creelman Fire initially started 2:49 p.m. July 22 in San Diego County, 5 miles Se from Ramona.

After being active for two days, it has burned 347 acres of private land. A fire crew of 82 managed to contain the blaze entirely by Friday evening. The cause remains undetermined. To date, the expenses for managing the wildfire stand at $1,973,296.

Brush, standing at two feet, is the main fuel driving this wildfire.

What to expect when two-foot brush is fueling a wildfire

Due to the density and flammability of brush vegetation, brush fires create moderate to high intensity flames. Containment efforts might be challenging, especially in dry and windy conditions, as such wildfire tends to spread rapidly. There’s an increased risk of ember production, which can lead to spot fires as well as brush fuels produce dense smoke.

NIFC Fire Complexity Analysis

This wildfire is considered to be a Type 3 incident. What it means:

• Resources are usually local and some or all of the command and general staff positions may be activated, usually at the division/group supervisor and/or unit leader level. Units may have a predetermined Type 3 organization designated.

• Type 3 organizations manage initial attack fires with a significant number of resources, an extended attack fire until containment/control is achieved or an escaped fire until a Type 1 or 2 team assumes command.

• Initial briefing and closeout are more formal.

• Resources vary from several resources to several task forces/strike teams.

• The incident may be divided into divisions.

• The incident may involve multiple operational periods prior to control, which may require a written Incident Action Plan (IAP).

• A documented operational briefing will be completed for all incoming resources and before each operational period. Refer to Incident Response Pocket Guide for outline.

• Staging areas and a base may be used.

• By completing an Incident Complexity Analysis, a fire manager can assess the hazards and complexities of an incident and determine the specific positions needed (e. G, if sensitive public/media relationships are evident, then an information officer should be ordered as part of the team).

• When using a Type 3 organization or incident command organization, a manager must avoid using them beyond the Type 3 complexity level.

• A Type 3 IC will not serve concurrently as a single

Fire containment

What does 100% containment mean?

Note that full containment doesn’t mean the fire is completely out. In this case, it means that the wildfire has been fully enclosed by a control line and it is now stopped from spreading. A fully contained wildfire may continue to burn within the containment perimeter but is not likely to spread.

However, there’s a significant difference between containing and controlling a wildfire. After the fire is fully contained, the next step is to control it. Controlling a fire means ensuring that the fire can’t spread or cross the containment line.

Containment is part of a larger plan for managing a wildfire. It is normally expressed as a percentage and it refers to how much of the fire perimeter has been surrounded/enclosed by a control line that firefighters create. The containment percentage indicates a certain level of control, but it doesn’t always correlate to safety level. Also, it’s important to note that containment doesn’t mean a fire is out.

How is containment measured?

The incident’s central command constantly receives progress reports from firefighters on the ground. As the fireline is constructed, inspected or reinforced, mappers record those details to adjust the containment percentage. The percentage tells the public how much of the fire perimeter is believed to not go beyond the control lines.

Source: National Interagency Fire Center