Update: Be prepared for strong thunderstorms in Johnson and Ellis counties Tuesday night

Published Jul 9, 2025

The NWS Fort Worth TX issued an updated weather alert at 8:53 p.m. on Tuesday for strong thunderstorms until 9:30 p.m. for Johnson and Ellis counties.

Residents may experience wind gusts of up to 40 mph.

“At 8:53 p.m., Doppler radar tracked a strong thunderstorm near Midlothian, moving southeast at 15 mph,” says the NWS. “Gusty winds could knock down tree limbs and blow around unsecured objects.”

Expect strong thunderstorms in the following locations:

• Waxahachie and Midlothian around 9 p.m.

• Maypearl around 9:15 p.m.

Other locations impacted by this storm include Reagor Springs, Ike, Pecan Hill, Boyce, Griffith, Rockett, and Joe Pool Lake. This includes Interstate 35E between mile markers 393 and 411.

According to the NWS, “If outdoors, consider seeking shelter inside a building. Torrential rainfall is also occurring with this storm and may lead to localized flooding. Do not drive your vehicle through flooded roadways.”

This alert is in effect until 9:30 p.m.

Actions to take when lightning threat is imminent

Around 25 million lightning strikes occur in the United States every year, with most taking place during the summer months. The NWS reports that these strikes result in about 20 fatalities annually. The probability of lightning strikes rises as a thunderstorm approaches and peaks when the storm is directly above. As the storm moves away, this likelihood decreases.

Here are recommendations for maintaining safety during a thunderstorm:

• To minimize risk of being struck by lightning, when going outside, have a plan to get to a safer place.

• If the sky turns ominous and thunder can be heard, find a secure place for shelter.

• Once indoors, avoid touching corded phones, electrical equipment, plumbing, and windows and doors.

• Wait for 30 minutes after the final lightning or thunder before heading outside again.

If finding indoor shelter is not an option:

• Avoid open fields, the top of a hill, or a ridge top.

• Stay away from tall, isolated trees or other tall objects. If you are in a forest, stay near a lower stand of trees.

• When in a group, space out to prevent the current from transferring between individuals.

• If you are camping in an open area, set up camp in a valley, ravine, or other low area. Remember, a tent offers no protection from lighting.

• Keep a distance from water, wet articles, and metal objects. While water and metal do not draw lightning, they are proficient conductors of electricity.

What steps to follow when driving in the rain?

• Switch on headlights — Even during daylight hours, using headlights can enhance visibility and signal your presence to other drivers.

• While driving — Stick to the middle lanes and stay on elevated ground. Rainwater tends to accumulate at the road edges.

• Steer clear of puddles — Driving into puddles or low areas of rainwater can cause vehicles to hydroplane or skid out of control.

• Don’t tail large vehicles closely — Trucks or buses can kick up a water spray that obstructs visibility.

• Avoid flooded zones — If you encounter a flooded road, make a U-turn and go back. The powerful currents of flash floods can carry drivers off the road. Driving through deep water can also damage a vehicle’s mechanical and electrical systems.

What is hydroplaning?

Hydroplaning happens when a vehicle starts sliding uncontrollably on wet roads.

This happens when water in front of the tire builds up faster than the vehicle’s weight can push water out of the way. The water pressure then causes the vehicle to rise and slide on a thin layer of water between the tires and the road, making the driver lose control. The top three contributors to hydroplaning are:

1. Vehicle speed — When a vehicle’s speed increases, the tire-traction grip and ability to control the vehicle decreases. Drive at a reduced speed during wet weather.

2. Water depth — The deeper the water, the sooner a vehicle loses traction on the road. It doesn’t matter how deep the water is, even a thin layer can lead to hydroplaning.

3. Tire tread depth — Checking your tire tread before hitting the road is important, as low or no tread can lead to sliding.

In the event of your vehicle hydroplaning, here’s what to know:

• Ease off the accelerator — Step off the gas to slow down the vehicle until the tires find traction.

• Turn into the skid — Turning into the skid can help the vehicle’s tires realign to regain control.

• Make sure the tires reconnect with the road — During the skid, wait until the tires reconnect with the road and then gently straighten the wheels to regain control.

• Brake gently as needed — Brake normally if the vehicle has anti-lock brakes and pump brakes gently if in an older vehicle.

Source: The National Weather Service